Mud tanks are important for whole drilling mud system. Holding the
drilling fluids and as platform for mud equipment. Per different
process phase there will be different compartment arrangement.
Main structure: Usually, the tanks including main body, compartment, walk way,
stairs, gurad rail, drain gate, man hole, fittings,etc.The
pipelines for cable, etc.
Installation: Find out even ground for convenient handle and set up. Minimize
the environment effect on tank performance. Put tanks in order
according to practical demand based on our layout instruction.
Please pay more attention on different tanks function and order as
well as the seal and connection between tanks. Furthermore, Aipu
will dispatch certain people to do commissioning and training
Legal operation: All tanks will be welded with lifting holes. The certain holes
designed with sufficient reliability and balance. During practical
operation they are safe please pay attention on lifting holes with
mark. Do all the process according to warnings prevent any danger
or trouble. Considering operators safety please all workers put on
the safety cap make sure no fallings from tank.
Maintenance: The tanks made by Aipu adopted high quality national standard
steel. Essentially assure the quality. Professional maintenance
will lead tanks long life and good performance.We will do the sand
blasting before painting very carefully. The paintings layers
including 2-primary, 2-medium, 1-finish. Anyhow, please clean the
tanks completely when stop operating it otherwise the drilling
fluid will fill up and too hard to clean out. If we don't clean
tanks fully the internal content may abrase tank wall since main
mud are chemicals. It's very necessary to clean tanks deeply don't
keep anything blocked at drain gates or valves.
Please contact Aipu solids control for more details on mud tanks.
Also the tanks for water and oil